Power Protection & Automation
Empowering Futures, Safeguarding Networks: Mastering Power System Protection and Substation Automation.
Why to join ELP?
Introduction:
Welcome to the “Power System Protection and Automation” training program, hosted by the Electrical Learning Portal (ELP). This comprehensive course is designed to provide a thorough understanding of power system protection and the intricacies of substation automation. Participants will begin with the fundamentals, exploring the basics of power system protection and the need for it. The training will cover essential components of a protection system and various protective devices, both old and new. We will also address the future of the protection system in the power sector.
The program will then delve into specific protection types, including overcurrent protection and its applications, transformer protection (unit, backup, and mechanical), and feeder/line protection. The course also covers the protection of generators, motors, and filters.
In the final segments, you will explore substation automation, including the typical network architecture and the basic elements of an automation network. The course will provide insights into various substation automation protocols, such as IEC 103, IEC 61850, and Modbus. You will also gain practical experience with hands-on sessions for configuring IEDs from
various manufacturers like ABB, Siemens, and Schneider/GE. This program offers an immersive experience to enhance your expertise in power system protection and substation automation, preparing you for the evolving demands of the power sector.
Topics to be discussed.........
1. Introduction to the Power System & Substations Equipment and Sensors
2. Basics of Power System Protection
3. Overcurrent Protection and coordination
4. Transformer Protections
5. Feeder/Line Protections
6. Generator, Motor Protections. & Filter protections
7. Supervision & Other Components of the Protection System
8. Basics components of Numerical Relays
9. Substation Automations Typical Network Architecture
10. Substation Automation Protocols
11. RTU and Gateways
12. 12. ABB Make IED's Configurations. (PCM600) along with MMS & GOOSE Config with other make IED’s
13. Siemens Make IED's Configurations (Digsi 4.XX) along with MMS & GOOSE Config with other make IED’s
14. Schneider/GE Make IED Configurations. (Studio/Agile/Easergy Pro) along with MMS & GOOSE Config with other make IEDs
15. Digital Substations
16. IED Scout & IEC browser as a HMI Client
17. Hands on Sessions 5(Chance to do Offline Configuration of IED’s)
19. Hands on Sessions




Training Program Details
Course Duration: 06 Weeks
Enroll Now
Power Protection and Substation Automation-
$800.0Original price was: $800.0.$600.0Current price is: $600.0.
Explore More Courses......

Electrical Distribution System Design

ETAP: An Essential Training
Electrical: QA/QC







Myself Shakilur rahman baig.I attended electrical designing and drafting course and my instructor was Engg Sadiq. He is an excellent instructor. You will have all your doubts clear. The instructor is polite and with a sound knowledge of the subject. I loved the course. If for some reasons you miss the class you will get the backup which is a good thing.

Way of teaching is very nice, polite in nature with gives solution of each and every query.Excellent in electrical design and drafting course.We should join for as future market demand of technical person this is the best platform to improve ourselves in the field of designing and drafting course.

Latest ekit news
Ekit Latest News
Explore the Technical Blog Posts
Curtailment of Renewable Energy
Strategic Analysis: Global Renewable Energy Curtailment (2025-2026) 2026 Energy Intelligence Report Curtailment of Renewable Energy Global Analysis of Unutilized Generation Capacity & Structural Mitigation Strategies (2025-2026) Explore BESS Solutions Quantifying Systemic Rejection The gap between clean energy potential and grid intake is widening. As VRE (Variable Renewable Energy) penetration increases, the rejection of zero-marginal-cost electrons […]
Why 2050’s Energy Revolution Demands Skilled Experts
A Vision for a Sustainable Future As the world moves toward a cleaner, more sustainable energy future, India has set ambitious goals to transform its power infrastructure. The government’s 2050 energy roadmap envisions a diversified energy mix, incorporating offshore wind, battery energy storage systems (BESS), smart grids, modular nuclear reactors, and space-based solar arrays. This […]
Is Grounding Only the Exposed Conductive Part Sufficient for Electric Shock Protection?
It is very common myth that system is healthy if connected to earth electrode with least earth pit resistance.
Power Protection & Automation
Empowering Futures, Safeguarding Networks: Mastering Power System Protection and Substation Automation.
Why Join ELP?
Build your technical understanding through structured engineering training and industry-focused learning.
ISO Certification
Awarded with an ISO certified training completion certificate.
Best Trainers
Learn with the Best Trainers, Master Every Skill!
Latest Content
Learn the Latest Content and Stay Ahead in Your Journey of Knowledge.
Real-Time Project
Learn on Real-Time Projects for Practical Expertise!
Job Ready
Unleash Your Potential with Our Job Ready Training Program!
Introduction.
Understanding power system protection, numerical relays and modern substation automation.
Welcome to the Power System Protection and Automation training programme, hosted by the Electrical Learning Portal (ELP). This comprehensive course is designed to develop a thorough understanding of power system protection principles and the engineering practices involved in modern substation automation. Participants begin with the fundamentals of electrical power system protection, understanding why protective systems are essential for maintaining the reliability and safe operation of electrical networks. The programme also introduces the essential components of protection systems and the evolution of protective devices, from conventional technologies to modern numerical relays.
The programme then explores different types of power system protection schemes, including overcurrent protection and coordination, transformer protection, feeder and transmission line protection, and protection applications for generators and motors. Participants will also study unit, backup and mechanical protection concepts, along with supervision and other essential components of a protection system. The course introduces the fundamental components and operating principles of numerical relays, helping participants understand their role in detecting electrical faults and initiating appropriate protective actions.
A major part of the training focuses on substation automation architecture and communication protocols. Participants will explore typical substation automation network architectures, including Remote Terminal Units (RTUs), gateways and Intelligent Electronic Devices (IEDs). The programme covers communication technologies and protocols such as IEC 103, IEC 61850 and Modbus, together with the concepts of Manufacturing Message Specification (MMS) and Generic Object-Oriented Substation Event (GOOSE) communication. These topics provide an understanding of how protection devices and automation systems exchange information within modern substations.
The practical component of the programme introduces IED configuration and digital substation engineering. Participants will explore configuration workflows for ABB numerical relays using PCM600, Siemens IEDs using DIGSI 4, and Schneider/GE devices using the relevant configuration platforms, including Studio, Agile and Easergy Pro as specified in the course syllabus. The training also covers MMS and GOOSE configuration, IED Scout, IEC Browser as an HMI client and hands-on configuration sessions. Through these subjects, participants develop a structured understanding of protection relay configuration, substation communication and the practical engineering concepts used in modern power system protection and automation.
Topics to be Discussed.
Explore the technical subjects covering power system protection, numerical relays and modern substation automation.
Introduction to the Power System, Substation Equipment and Sensors
↗Fundamentals of Power System Protection
↗Overcurrent Protection and Coordination
↗Transformer Protection
↗Feeder and Line Protection
↗Generator, Motor and Filter Protection
↗Supervision and Other Components of the Protection System
↗Fundamental Components of Numerical Relays
↗Typical Substation Automation Network Architecture
↗Substation Automation Protocols
↗RTUs and Gateways
↗ABB IED Configuration using PCM600, including MMS and GOOSE Configuration with Other IED Manufacturers
↗Siemens IED Configuration using DIGSI 4.XX, including MMS and GOOSE Configuration with Other IED Manufacturers
↗Schneider / GE IED Configuration using Studio, Agile and Easergy Pro, including MMS and GOOSE Configuration
↗Digital Substations
↗IED Scout and IEC Browser as an HMI Client
↗Five Hands-on Sessions — Opportunity for Offline IED Configuration
↗Hands-on Sessions
↗Explore the Course.
Access the course syllabus and explore the engineering domains covered in this programme.
Training Program Details.
Essential information about the programme, course duration, enquiries and enrolment.
06 Weeks
Structured training in power system protection, numerical relays and substation automation.
Enrolment Assistance
Connect with the ELP team to discuss registration and participation in the training programme.
Discounted INR price displayed for this programme.
Please contact ELP to confirm applicable fees and registration details before enrolment.

